PRIVATE LABEL METAL CURLER

Metal Eyelash Curler for Private Label Programs

Topcom develops private label metal eyelash curlers from a reference product, drawing or target specification. A practical starting size is 110 mm overall length with a 35 mm head section, matching the reference model shown on this page. Topcom quotes stainless steel or carbon steel frames, silicone or rubber pads, 0, 1 or 2 replacement pads, mirror or matte metal finishes, black coatings and metallic color finishes. The approval sample includes the selected logo and retail pack, so the product and presentation are reviewed as one version.

Request a metal curler sample review

Rose-gold metal eyelash curler shown from the front
110 × 35 × 7 mm
AISI 420 / 430 / 304
300–10,000 pcs

Start with a numeric quotation brief

Specification fieldQuote-ready starting options
Reference size110 × 35 × 7 mm format; alternative frame dimensions from buyer drawing or sample
Frame materialAISI 420, 430 or 304 stainless steel; carbon steel route for projects that specify the required surface protection
Pad systemSilicone or rubber pad; 0, 1 or 2 replacement pads in the selling unit
Finish directionMirror, satin or matte metal; black, gold, rose-gold or other approved color finish
LogoLaser engraving, stamping or printing after the markable area is defined
Quote quantities300, 1,000, 3,000 and 10,000 pieces
Production planningTypically 20–35 days after design, artwork and sample requirements are confirmed

These numbers give the inquiry a real starting point. The quotation records the chosen frame, dimensions, tolerance, pad profile, finish, packing method and delivery basis.

Metal eyelash curler reference showing 11 cm overall length and 3.5 cm head section
Reference image used to begin the dimensional quotation.

Choose the frame and pad system first

The frame determines the visible profile and closing path of the curler. Topcom develops the frame from the 110 × 35 mm reference, a buyer-supplied sample or a controlled drawing. State the clamp width, curve, handle profile and dimensional tolerance in the RFQ. The rose-gold, black and silver-looking images provide ready finish directions for the first sample round.

If grip profile, molded color or a softer handle interface is central to the brief, compare the plastic handle eyelash curler route before locking the model. Keep handle material, connection method and frame geometry as separate approval fields.

Review the hinge and pad as part of the same construction. Choose a 500, 1,000 or 3,000-cycle opening-and-closing check when the program needs a numeric durability target. Record hinge looseness, rubbing, pad movement and clamp contact before and after the test. If the selling unit includes replacement pads, fix the compatible pad profile, color, quantity and package position in the specification.

Compare clamp curve and contact on physical samples

Compare candidate frames with the buyer’s reference from the front and side. Record clamp width, head depth, curve profile and the visible contact line. Give each construction its own sample code when more than one frame is under consideration.

Match the finish, logo and pack to the selected model

Provide the selected steel route, finish direction and vector artwork. Define the logo size in millimetres and place it on a marked drawing. For color finishes, supply a Pantone reference or physical color sample. Topcom will carry the approved material, finish and artwork revision into the sample record.

The package should hold the curler without pressing on the frame or pad. State the selling unit, package reference, insert requirement, artwork and barcode or label needs. Review the packed sample with the actual curler inside, including the position of any replacement pads.

Metal eyelash curler sample checklist

  • Record the sample code, frame profile and material declaration.
  • Measure the overall length, head section and other controlled dimensions against the drawing.
  • Review clamp curve, pad seating and visible contact along the closing edge.
  • Check hinge travel, rebound, looseness and interference before and after the selected 500, 1,000 or 3,000-cycle test.
  • Compare the finish, logo position and surface appearance with the approved reference.
  • Identify replacement pads by profile and quantity when they are part of the selling unit.
  • Review the loaded retail pack, insert and artwork as one version.

Seller FAQ

How should a seller choose the clamp curve for an eyelash curler?

Send the product your team currently uses as a reference, or provide clear front and side images with the target areas marked. Compare every candidate sample with the same clamp-width, curve-profile, contact-line and closing-path checklist. Approve the selected model only after the physical sample matches the recorded reference.

Can a seller list replacement pads as universal?

No. Compatibility depends on the selected frame and pad profile. Link each refill pad to the exact curler model in the product specification and packed-unit list. Confirm the pad profile, color, quantity and package position before the retail version is approved.

Related Reddit discussion: How users compare eyelash curler curve and fit

Request a metal curler quotation

Send the target market, reference product, required dimensions, tolerance, steel route, pad quantity, finish, logo artwork, packaging concept and one quantity from 300, 1,000, 3,000 or 10,000 pieces. Topcom will return the proposed model, sample plan and dated commercial terms. Production planning normally starts from the 20–35 day range after design confirmation.

Request a metal eyelash curler sample review